PureFlow AirDog - Replacement Parts
PureFlow AirDog offers a variety of universal replacement parts. These parts can be used on many different applications. If you are unsure of which parts you need, please reach out to our technicians at 877-421-3187! RETURNS ARE NOT ACCEPTED ON REPLACEMENT PARTS!
Browse Replacement Parts Products
Items 1-24 of 24
HS20
Description: DieselRX section of 300 psi 1/2" Inner Diameter (I.D.) fuel hose. This 20ft section of hose is supplied in many AirDog kits for installation. Combined with our 1/2 Quick connect fittings, this hose...More Details »
Item #: HS20
Condition:
New
Price: $60.00
Description: These are the replacement fittings that thread into the base of your AirDog product. All fitting options have descriptions of what model AirDog products they fit. Please align your model number and...More Details »
Item #: AirDog Base Fittings
Condition:
New
Description: The cradle bracket mounts to the base of the pump. The cradle is attached by 4 allen bolts in each corner of the base. This part is necessary for mounting the AirDog pump in any way.
Item #: 001-3C-0004
Condition:
New
Price: $22.00
Description: This is the 10 micron fuel filter that is a direct fit for all AirDog I, AirDog II, AirDog II-4G, and AirDog II-5G models. This filter is good for colder climates to help reduce the chance...More Details »
Item #: FF100-10
Condition:
New
Price: $29.00
Description: This is the 2 micron fuel filter that is a direct fit for all AirDog I, AirDog II, AirDog II-4G, and AirDog II-5G models.
Cross Reference Numbers: (Note, this is for fitment and not...More Details »
Item #: FF100-2
Condition:
New
Price: $29.00
Description: Mounting Hardware for all AirDog products available!
PICTURES MAY NOT BE ACTUAL!
Item #: AirDog Mounting Hardware
Condition:
New
Description: Every AirDog system requires a return! Return Tee's vary depending on pump model and application. There are several options to choose from! Please verify with our technicians if you have any questions regarding which product you need!
Item #: AirDog Return Tee's
Condition:
New
Description: This is the water separator that is a direct fit for all AirDog I, AirDog II, AirDog II-4G, and AirDog II-5G models.
Cross Reference Numbers:
NAPA: 3616
WIX: 33616
Baldwin:...More Details »
Item #: WS100
Condition:
New
Price: $32.00
Description: The Universal AirDog Wiring Harness is designed to work in conjunction with all AirDog products both new and old (except for 2015+ Duramax's and 2017+ Powerstroke's, Call our tech support for the...More Details »
Item #: 5E-2-010-HD & 5E-2-JMP
Condition:
New
Price: $70.00
Description: Signified by the red dot, FQC118S fittings utilize a 11.8mm female quick connect on one side and a 1/2" self sealing hose barb for rubber line on the other side. These fittings are commonly used to...More Details »
Item #: FQC118S
Condition:
New
Price: $6.00
Description: FQC1290 fittings utilize a 1/2" female quick connect on one side and a 1/2" self sealing hose barb for rubber line on the other side. These fittings are 90° for redirecting 1/2" fuel line where a...More Details »
Item #: FQC1290
Condition:
New
Price: $6.00
Description: FQC12S fittings utilize a 1/2" female quick connect on one side and a 1/2" self sealing hose barb for rubber line on the other side. These fittings are commonly used to hook 1/2" I.D. rubber fuel...More Details »
Item #: FQC12S
Condition:
New
Price: $6.00
Description: FQC3890 fittings utilize a 3/8" female quick connect on one side and a 1/2" self sealing hose barb for rubber line on the other side. These fittings are 90° for redirecting 1/2" fuel line where a...More Details »
Item #: FQC3890
Condition:
New
Price: $6.00
Description: FQC38S fittings utilize a 3/8" female quick connect on one side and a 1/2" self sealing hose barb for rubber line on the other side. These fittings are commonly used to hook 1/2" I.D. rubber fuel...More Details »
Item #: FQC38S
Condition:
New
Price: $6.00
Description: These brackets work together to mount an AirDog pump on the frame rail. The appropriate mounting hardware kit, spacer block, and cradle bracket are required to make these work in conjunction with your AirDog product.
Item #: 010-3C-0001 & 010-3C-0002
Condition:
New
Price: $44.00
Description: The Fuel Module Upgrade Kit modifies the fuel module to allow for a 1/2" OE-style suction tube to be installed for higher flow applications and applications to where the factory in-tank fuel pump...More Details »
Item #: 901-01-0520
Condition:
New
MAP $99.00
Price: $155.00
Description: The Diesel Rx universal fuel sump helps aid aftermarket fuel systems by utilizing gravity to pull fuel from the tank. Our redesigned sump has both a suction and return port! We integrated a dual...More Details »
Item #: AD09SMP
Condition:
New
Price: $165.00
Description: These are the replacement fittings that thread into the base of your AirDog Raptor product. All fitting options have descriptions of what model Raptor products they fit. Please align your model...More Details »
Item #: Raptor Base Fittings
Condition:
New
Description: Raptor mounting hardware kits available for all Raptor products!
PICTURES MAY NOT BE ACTUAL!
Item #: Raptor Mounting Hardware
Condition:
New
Description: The wiring harness for an AirDog utilizes a relay to switch power on and off to the pump. All AirDog harnesses utilize the relay pictured! This is a direct replacement relay for all AirDog wiring harnesses! WIRING HARNESS NOT INCLUDED
Item #: 5C-8-04-001
Condition:
New
Price: $11.00
Description: The Spacer Block connects the AirDog Cradle Bracket and Frame Brackets. This part spaces the pump away from the frame for optimum clearance.
Item #: 010-3C-0003-A-P
Condition:
New
Price: $5.00
Description: This kit is to install a 5/8" draw straw suction tube in the fuel tank to feed your AirDog fuel pump. This kit installs by drilling a hole in the top of the fuel tank and securing the bulk-head...More Details »
Item #: 901-01-0351-QC
Condition:
New
MAP $120.00
Price: $125.00
Description: The WAP102 Injection pump fitting is designed to work in conjunction with our FQC Quick Connect Fittings. Thread size: 12mm x 1.5 (M12x1.5). This fitting is designed to directly thread into CP3,...More Details »
Item #: WAP102 & 1P-5-DS
Condition:
New
Price: $12.00
Description: The WAP103 Injection pump fitting is designed to work in conjunction with our FQC Quick Connect Fittings. Thread Size: 14mm x 1.5 (M14x1.5). This fitting is designed to directly thread into P-PUMPS...More Details »
Item #: WAP103 & 1P-5-ES
Condition:
New
Price: $15.00
Items 1-24 of 24